Questions about Selfsat Snipe V3 Single

I can hardly imagine that. The housing covers the entire base plate. The cables come out of the housing on the side. The Ksbel can only be led through the roof next to the base plate. A waterproof cover for the feed-through (the hole in the roof) is included.

In this case, please contact our customer service directly so that your order can be checked. https://www.digitec.ch/de/information/contactinformation

I am not familiar with this standard. I bought my Snipe in October 2018 and installed it on my motorhome. It worked normally until mid January 2019. I could receive both Astra1 and Eutelsat 5W. From that date onwards only Astra1 was available. For Eutelsat 5w the search module found this satellite but could not lock onto it (Lock impossible) and the search continued without success. I was asked to send back the entire Snipe 3, which represents half a day's work, especially to remove the two cables that are in hidden sheaths. The only drawback I found with this antenna is that it is not suitable in winter after snowfalls because it gets blocked with snow that freezes and blocks the mechanism.

I can't answer that. It will not be put into operation until May. During the test run it found the satellites. It aligns itself fully automatically with the geostationary satellites.

First positioning (on Hotbird or Astra) takes up to 3min depending on location. The first positioning of the second satellite (after the first one has been found) usually takes about 1min. Once both satellites have been positioned, the change (when changing channels via the receiver) only takes approx. 3-4sec.

Yes, according to our information it fits.

The base plate is included, the power supply unit from V2 does not fit! I bought it from SatOnline GmbH (www.satonline.ch) ArtNr. 20295 for Fr. 72.50.

The dimensions of the product are as follows: Depth: 20.10 cm Width: 51.50 cm Height: 35.50 cm Weight: 10.3 kg