Wellpower Lipo battery Ultima

Wellpower Lipo batteries with the sensational performance ratio. Series = high-quality workmanship + outstanding performance data. Depending on the type -100C loadable (peak current) and charging currents of up to 8 times the nominal capacity make the Lipos the first choice for ambitious modellers. Balancer connector system. The 2nd version is supplied as standard with a Liposafe specially manufactured according to battery size (from 1000mAh). For maximum safety during transport and storage. The battery and Liposafe can even be installed directly in the model. (Note temperature development). For conscious modellers, we offer a special series with a slightly lower nominal load capacity and without Liposafe, but with the familiar quality features. Splitpacks have two balancer connections and 4 main power connections. Ultima" version with real 35C or 60C continuous load and peak between 70C and 90C (1 sec.) or 120C (max. 0.5 sec.) for uncompromising applications, e.g. in competition. "Check" version with standard built-in LED voltage indicator for quick test of the battery charge status. Specifications in brackets only apply to short-term charging (max. 5 seconds) Charging currents: "CHx" specifications indicate the maximum permissible charging current. For CH2, for example, this is 2 times the nominal capacity (i.e. max. 4A for a 2.0Ah battery), CH6 is 6 times the nominal capacity, etc. Tip: The maximum continuous discharge current is only recommended with active temperature monitoring; preheating cold batteries increases their performance. Recommended storage voltage 3.70... 3.80 V / cell Protect against short circuits, mechanical damage, overheating, deep discharge and overcharging. Only charge with a suitable lipo charger on a fireproof surface Do not continue to use damaged cells Never charge or discharge unattended.