Nexa MLR-1923 + MIMST-1703 Wireless passage alarm

Nexa Smart Home Wireless Passage Alarm – Kit with MLR-1923 Doorbell and MIMST-1703 Motion Sensor

Perfect for shops or businesses that want to be alerted when someone enters through the entrance or doors.

MIMST-1703: Motion detector (indoor use)
A small and flexible motion detector for indoor use that sends an ON signal to the connected receiver when movement is detected. After the selected time interval, an OFF signal is then sent. The motion detector can be easily mounted with the included magnetic bracket that is screwed into the substrate. It is compatible with all self-learning receivers, including Nexa wireless doorbells. Not suitable for use with dimmer receivers.

• Timer function: 0.5/1/5/10 min
• Knob for light sensitivity
• Easy mounting with magnetic attachment
• Small and flexible

Power source: Battery, 1 x CR2450
Radio protocol / frequency: System Nexa / 433.92 MHz
Range: Up to 30 meters
Operating temperature: 0-40 °C
Standby power consumption: Under 1 W
IP classification: Indoor use
Dimensions (W x H x D) / (Ø x H): Sensor: 37.5 x 65 x 13 mm / Magnet: 18 x 10 mm

Nexa MLR-1923 Wireless Doorbell Loose Receiver, Plug-in
A plug-in doorbell with a blue LED indicator. In addition to functioning as a standard doorbell with a push button (push button sold as an accessory), it can also receive signals from a motion detector and magnetic contact or remote control if desired. There are 6 selectable tones, allowing different transmitters to provide different ringtones. The sound level can be set at 4 different levels: High, Medium, Low, and Mute.

• Plug-in (220-240 V)
• 32 memory slots
• Easy installation
• 6 selectable ringtones
• 4 sound levels
• Up to 150 meter range

Specifications:
Power source doorbell: 220-240 V ~50Hz
Protocol: System Nexa (433.92 MHz)
Range: Up to 150 m
Power consumption: < 1 W
IP classification: Push button IP44
Dimensions of doorbell (W x H x D): 59 x 100 x 37 mm.