Keeppower Battery 18650 protected

High-quality cell with long lifespan and high cycle stability. Keeppower 18650 lithium-ion battery with PCB protection. Protection against short circuit, overcharging, and deep discharge. Made in Japan.

Designed for flashlights, LEDs, battery carriers, etc. Please check the dimensions of the cell before purchasing! Due to the built-in electronics, the cell is not suitable for every application. Height and diameter are larger than a standard 18650 cell without PCB.

Cell: Samsung ICR18650-22F
Capacity: 2200mAh
Min. Capacity: 2150mAh
Nominal Voltage: 3.7V
Charge End Voltage: 4.2V ± 0.05V
Discharge End Voltage: 2.75V
Calculated Internal Resistance: 0.11 Ohm
Positive Terminal: raised (Button Top)
Max. Discharge Current: 2C = 4.4A
Chemistry: LiCoO2 (ICR)
PCB Protection Circuit: integrated 10A
Charging Method: CC-CV
Diameter: 18.50 mm ± 0.15 mm
Height: 68.9 mm ± 0.15 mm
Weight: 47 g ± 1 g

Safety Notes: Please be aware that removing or damaging the protection electronics (PCB) can lead to a short circuit, fire, or explosion.

Additional Features: Lithium-ion batteries are thermally stable and do not suffer from memory effect. They operate on the basis of lithium and are characterized by high energy density.

Technical Data for "Keeppower 18650 - 2200mAh, 3.7V Li-Ion Battery Protected":
Normal Charge Current: 1100mAh/3h
Operating Temperature Charging: 0 °C - 45 °C
Operating Temperature Discharging: -20 °C - 60 °C

Notes: Charging lithium-ion batteries requires a special charger that charges the batteries according to a specific charging method (CCCV = constant current, constant voltage). The batteries must not be charged above a voltage of 4.2 volts, as this poses a risk of fire and explosion. It is advisable to charge the batteries only up to about 4.1 volts, as this significantly increases their lifespan and number of charge cycles.